Waveshare 1.83inch IPS LCD Display Module 240×280 Resolution SPI 65K Colors for Arduino / Raspberry Pi / STM32 / ESP32

説明

【Overview】

1.83inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS LCD, 65K Colors, Rounded Corners, Micro LCD Display

【Note】

Do not include Raspberry Pi and Other motherboards

【Features At A Glance】

•  240×280 resolution, 65K colors, clear and colorful displaying effect
• SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32/ESP32
• Comes with online development resources (examples for Raspberry Pi/Arduino/STM32/ESP32, etc.)

【Specifications】

• Operating voltage: 3.3V/5V (Please ensure that the supply voltage and logic voltage are consistent; otherwise, it may result in the device not working properly.)
• インターフェース：SPI
• LCD type: IPS
• Driver: NV3030B
• Resolution: 240(H)RGB x 280(V)
• Display size: 30.197 x 35.230 mm
• Pixel size: 0.126 × 0.126mm
• Dimension: 33 × 40 mm

【Onboard Voltage Translator】

[] Compatible With 3.3V / 5V Power Input

【Onboard SPI Control Interface】

[] For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

• VCC : Power (3.3V / 5V input)
• GND : Ground
• DIN : SPI data input
• CLK : SPI clock input
• CS : Chip selection, low active
• DC : Data/Command selection (high for data, low for command)
• RST : Reset, low active
• BL : Backlight

【Hardware Connection】

Raspberry Piへの接続

Arduinoボードへの接続

【外形寸法】

 

 

• 1.83inch LCD Module x1
• MX1.25 8PIN cable x1

製品のカスタマイズ

当社は製品のカスタマイズサービスを提供しています。. お問い合わせ お客様のご要望について話し合うため。.