5.8G Microwave Radar Sensor Switch AC 220V/ DC12V-24V Intelligent Energy Saving Control Microwave Radar Sensor

説明

特徴：
1.SAFE AND RELIABLE: The microwave sensor is safe, reliable, high detection probability, low false alarm, high resistance to fog, wind, dust, snow and extreme temperature
2.STABLE: The microwave sensor is based on Doppler principle and RADAR technology, the rod antenna and high performance microchip are used, and the working state is stable
3.DETECT HUMAN MOTION: Microwave radar is used as a control signal source to detect human motion. When someone enters the detection area, the indicator lights up immediately
4.ADJUSTABLE: It is an active motion detector, adjustable sensitivity, daylight detection and time setting
5.ENERGY SAVING AND ENVIRONMENTAL PROTECTION: This sensor switch has a detection range of 360°, a working frequency of 5.8GHz, low power consumption, energy saving and environmental protection

パラメータ:
Power supply: DC12-24V or AC 220V-240V
Maximum load: 7A
HF system: 5.8GHz CW radar, ISM frequency band
Transmission power:<0.2MW
Power consumption: approximately 0.5W
Installation method: indoor, ceiling installation
Arrival: 1-10 μ M (radius), adjustable
Time setting: 10 seconds to 30 minutes
Detection angle: 360 °
Light control: 2-2000 LUX
DC 12-24V Size : 85x38x40mm

AC 220-240V Size : 44 *42 *90mm
注意：
The high-frequency output of this sensor is<0.2MW, which is only the 5000th output of a mobile phone or microwave oven.
2. Connect N and L with power supply
3. Connect N ‘, L switch signal

パッケージ内容：
Inductive switch * 1
Screw pack * 1