DC 5V 12V タイムディレイリレー NE555 タイムリレーシールド タイミングリレー タイマー制御スイッチ 車載リレー パルス生成 デューティサイクル
DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle - 画像 (2)
DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle - 画像 (3)
DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle - 画像 (4)
DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle - 画像 (5)

DC 5V 12V タイムディレイリレー NE555 タイムリレーシールド タイミングリレー タイマー制御スイッチ 車載リレー パルス生成 デューティサイクル

$2.30

商品コード: 1005009138729578 カテゴリー: , ,

説明

1. Connect the power supply and delay the closing of the relay (this module only has a delay closing function and does not have a delay disconnection function unless the power is cut off). Specifically, after being powered on, the relay will not immediately draw in and out. At this time, the output terminal of the relay is in the following states: normally open and disconnected from the common, normally closed and connected to the common; After a delay of 1-10 seconds (adjustable delay), the relay will draw and connect. At this time, the state of the relay output terminal is: normally open and connected to the common, normally closed and disconnected from the common; As long as the module is continuously powered on, this state (relay suction state) will remain. Test phenomenon: After power on, the red power indicator light will turn on. After a delay of 1-10 seconds, the relay will pull in and hear a “click” sound, and the blue relay pull in indicator light will turn on

2. The delay time is adjustable, ranging from 0 to 10 seconds

4. Adding a potentiometer can increase the delay time

5. Increasing capacitor C1 can increase the delay time

6. Equipped with an input power indicator light

7. Equipped with relay engagement indicator light

8. Can control equipment with AC voltage below 220V/10A. (Maximum control equipment 2000W)

9. Equipped with relay continuous current protection.

10. Delay time formula: T=1.1RC. For example: capacitor 100uf, resistor 100K T=1.1 * 100000 * 0.0001=11 seconds

製品パラメータ：

Working voltage: DC12V/5V

Potentiometer delay time adjustable: 0-10 seconds

Delay time formula: T=1.1RC

Relay continuous current protection: available

Potential adjustment: with potentiometer, adjustable

DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 1DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 2DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 3

用途

1, the delay-vehicle device is turned on, to prevent excessive current when the car ignition burn-vehicle device.

2, you need to have in order to start the occasion, to prevent multiple devices simultaneously starting current is too large burning appliances.

DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 4DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 5

DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 6DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle — reference image 7

製品のカスタマイズ

当社は製品のカスタマイズサービスを提供しています。. お問い合わせ お客様のご要望について話し合うため。.

追加情報

重さ 該当なし

メーカーと製品に関するリソース

製品の仕様、同梱品、在庫状況、配送に関する詳細は、製品説明をご確認ください。.

レビュー

レビューはまだありません。

“DC 5V 12V Time Delay Relay NE555 Time Relay Shield Timing Relay Timer Control Switch Car Relays Pulse Generation Duty Cycle” の口コミを投稿します

メールアドレスが公開されることはありません。 ※ が付いている欄は必須項目です

関連商品