PCB Files & Manufacturing
Export Gerber and Excellon files from Sprint-Layout
Export Sprint-Layout board layers and drill data, identify plating, and package files for DIYIPCB.
Prepare the layout
Open the final Sprint-Layout board, such as a .lay6 project. Check the outline, copper clearance, text and intended hole sizes. Verify the physical board in PhotoView, then check the actual manufacturing export separately.
Export Gerber layers
- Open the Gerber Export command under File → Export.
- Select the used copper layers, required silkscreen, solder mask and outline. Use clear top/bottom labels in the output names.
- Check solder-mask generation settings so that intended solderable pads are exposed. Keep the normal production layers unmirrored.
- Choose the output folder and click Create Gerber files.
Export Excellon drilling data
- Open the Drill data (Excellon) export separately.
- Check drill sizes and the distinction between metallized and non-metallized holes. Separate files can make this clear; if a combined file is used, provide an unambiguous plating note.
- Save the drill output alongside the Gerbers using the same coordinate reference.
Do not send only the layout or preview
A PhotoView image helps communicate appearance but does not define fabrication geometry. Keep the editable project for revisions and send the Gerber-plus-drill package. If your installed viewer or edition cannot export production files, use an edition with export capability; renaming a layout file to .gbr does not convert it.
Check the exported files
Open the exported Gerbers and drill data together in a Gerber viewer. Confirm the outline dimensions, copper-layer count, pad-to-hole alignment, cutouts and mask openings. Check top and bottom views before accepting the export. A drill drawing or PDF does not replace machine-readable drill data.
Use one design revision per ZIP. Keep old exports outside the upload folder and identify any special stackup, slots or plating requirements in a fabrication note. See the complete Gerber package checklist.
Upload to DIYIPCB
Open DIYIPCB PCB / PCBA Online Quote, upload the Gerber ZIP and choose the material, specifications and quantity. Verify the displayed dimensions and layer count against your design; the preview is a reference, not engineering approval.
For bare PCBs, the Gerber ZIP must also contain the drill data. For assembly, provide a matching BOM and placement file as well. Use the available cart or inquiry option for your selected service. See BOM and placement-file requirements.
Software reference
Menu wording may vary by release. Consult the documentation for your installed version.
Still need help?
Email service@diyipcb.com with your order or request reference and the details of your question.