ESP32 LoRa V3 Entwicklungsboard 868MHz 915MHz SX1262 0,96 Zoll OLED-Display BT WIFI LoRa Kit für Arduino IoT Meshtastic (2 Sets)
ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) – Bild 2
ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) – Bild 3

ESP32 LoRa V3 Entwicklungsboard 868MHz 915MHz SX1262 0,96 Zoll OLED-Display BT WIFI LoRa Kit für Arduino IoT Meshtastic (2 Sets)

$47.87

Artikelnummer: 1005008430055338 Kategorien: , ,

Beschreibung

ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 1

Beschreibung: WiFi LoRa 32 is a classic IoT dev-board , it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions.

It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers.

Hinweis: Not include battery

If the antenna protective soft shell is too long and cannot be installed into the LoRa shell, you can shorten the antenna protective soft shell and be careful not to damage the internal copper tube of the antenna.

Merkmale:

– Microprocessor: ESP32-S3FN8 (Xtensa® 32-bit LX7 dual-core processor, five-stage pipeline rack Structure, frequency up to 240 MHz).
– SX1262 LoRa node chip.
– Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
– Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
– Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved (U.FL) interface for LoRa use.
– Onboard 0.96-inch 128*64 dot matrix OLED display can be used to display debugging information, battery power, and other information.
– Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.
– Support the Arduino development environment.
– We provide ESP32 + LoRaWAN protocol Arduino® library, this is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol. To make this code run, a unique license is needed.
– With good RF circuit design and low-power design.

LoRa Antenna 868-915mhz 2dBi built-in copper tube spring antenna
Electrical Specifications
Frequency range: 868MHz-915MHz
Gain: 2dBi
VSWR: ≤2.0
Input impedance: 50Ω
Polarization: vertical
Lightning Protection: DC Ground

Modellnummer: LoRa32 V3
Main chip: espressif esp32 and SX1262
Operating voltage: 3.3V to 7V
Flash: 64M-Bits
Lora chip: SX1262
Dual-mode Bluetooth: traditional Bluetooth and BLE low power Bluetooth
USB Interface: Typ C
USB to serial port chip: CP2102
Open communication distance: 2.8KM
Menge: 2 Sets

Mechanical Specifications

Wire Spec: RF1.13
Wire length: 10CM
Iput connector type: U.FL(for i p e x)
Antenna weight: 10g
Openrating temperature: -40℃~85℃

Lieferumfang:

2 X ESP32 Lora V3 OLED development board
2 X LoRa Antenna 868-915mhz
2 X JST 1.25mm-2P Connector
2.54 pin (no welding)
2 X Case for V3 LoRa Node Development board

Document Link :
https://github.com/HelTecAutomation/Heltec_ESP32

ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 2
ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 3
ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 4

ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 5ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 6ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 7

ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets) — reference image 8

Produktanpassung

Wir unterstützen Dienstleistungen zur Produktindividualisierung. Kontaktieren Sie uns um Ihre Anforderungen zu besprechen.

Zusätzliche Informationen

Gewicht 0.1 kg
Frequenz:

868MHz, 915MHz

Ressourcen für Hersteller und Produkte

In der Produktbeschreibung finden Sie Angaben zu technischen Daten, Lieferumfang, Lagerbestand und Versanddetails.

Rezensionen

Es gibt noch keine Rezensionen.

Schreibe die erste Rezension für „ESP32 LoRa V3 Development Board 868MHz 915MHz SX1262 0.96 Inch OLED Display BT WIFI Lora Kit for Arduino IOT Meshtastic (2Sets)“

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Ähnliche Produkte