Micro SD Storage Expansion Board Micro SD TF Card Memory Shield Module SPI For Arduino Promotion

Description

This module is a Micro SD card read-write module, which allows the microcontroller system to read and write files from the Micro SD card through the file system and SPI interface driver program. Arduino users can directly use the built-in SD card library in Arduino IDE to initialize and read/write Micro SD cards through this module.

The Micro SD card module cannot be used as a flash memory to write functions, and can only make read and write calls to files inside the SD card.

Product parameters

Working voltage: 4.5V-5V

Memory card type: Standard MicroSD (TF) card

Signal interface: 5V or 3.3V

Communication interface: Standard SPI interface

pinouts：

CS： Film selection signal, controlled by the controller

SCK： serial clock

MOSI： serial data in

MISO： serial data output

VCC： Connect the positive pole of the power supply (4.5V-5V)

GND： Connect the negative pole of the power supply

Example of use:

The D4 D11, D12, and D13 pins of the UNO development board are respectively connected to the CS SCK MOSI MISO of the MicroSD card module

Product Overview:

This module (MicroSD Card Adapter) is a Micro SD card read-write module that allows the microcontroller system to read and write files from the MicroSD card through the file system and SPI interface driver program. Users can directly use the built-in SD card library in Arduino IDE to complete card initialization and read/write operations.

Module features:

1. Supports Micro SD card and Micro SDHC card (high-speed card)

2. On board level conversion circuit, i.e. interface level can be 5V or 3.3V

3. The power supply is 4.5V~5.5V, with an onboard 3.3V voltage regulator circuit

4. The communication interface is a standard SPI interface

Product Customization

We support product customization services. Contact us to discuss your requirements.