{"id":11046,"date":"2026-10-08T11:38:31","date_gmt":"2026-10-08T11:38:31","guid":{"rendered":"http:\/\/www.diyipcb.com\/"},"modified":"2026-10-12T08:51:26","modified_gmt":"2026-10-12T08:51:26","slug":"altium-export-gerber-bom-pick-place-files-diyipcb","status":"publish","type":"post","link":"https:\/\/www.diyipcb.com\/de\/altium-export-gerber-bom-pick-place-files-diyipcb\/","title":{"rendered":"Wie exportiert man Gerber-, BOM- und Pick-and-Place-Dateien aus Altium Designer f\u00fcr DIYIPCB?"},"content":{"rendered":"
\n

Download the DIYIPCB Altium OutJob example, add it to your project, check the settings and generate Gerber, NC Drill, BOM and pick-and-place files together. Start with the four steps below; the illustrated configuration reference follows when you need to adjust an output.<\/p>\n

Quick start: download the template and export<\/h2>\n
\n

Get the OutJob example<\/strong>
Download DIYIPCB.OutJob from GitHub<\/a><\/p>\n<\/div>\n

    \n
  1. Download the template.<\/strong> Open the GitHub repository above, select DIYIPCB.OutJob<\/code> and use Download raw file<\/strong>. Save the file in your PCB project folder with the .OutJob<\/code> extension.<\/li>\n
  2. Add it to your project.<\/strong> Open your local .PrjPcb<\/code> in Altium Designer. Right-click the project in the Projects panel, choose Add Existing to Project<\/strong>, select DIYIPCB.OutJob<\/code> and open it.<\/li>\n
  3. Check the project settings once.<\/strong> Save the design and review its design-rule checks. Confirm the intended PCB data source, all copper layers, board profile and any milling layers, BOM manufacturer\/MPN fields, and assembly variant. Check DNP exclusions and placement conventions. The example uses [No Variations]<\/strong>; change this if your build uses a variant. See the configuration reference<\/a> below for the relevant dialogs.<\/li>\n
  4. Generate the files.<\/strong> Select Folder Structure<\/strong>, confirm the four outputs are enabled and click Generate content<\/strong>. Files are written to .\\DIYIPCB_Outputs\\<\/code> relative to the project. Review generation messages, then check and package the outputs<\/a> and upload them to DIYIPCB<\/a>.<\/li>\n<\/ol>\n

    For later revisions of the same project:<\/strong> save the updated design, reopen the OutJob and click Generate content again. Recheck settings when the layer stack, component fields or assembly variant changes, and inspect the generated files before manufacturing.<\/p>\n

    Template scope:<\/strong> this example was configured in Altium Designer 26.10.1 for the FEMTO four-layer board. Compatibility with other projects and versions has not been tested. Review it for each new project. Generation produces local files; combine Gerber and actual drill data into a ZIP and upload the fabrication and assembly files yourself.<\/p>\n

    This guide uses supplied Windows screenshots and the FEMTO RP2040 module<\/a>. Menu labels may vary by version.<\/p>\n